8.4.2 Word alarm
Last updated
Last updated
Description of word alarm setting
1) Basic settings
Alarm name: User can set alarm name for it;
Alarm Address: It is used for setting read address for word alarm;
Data format: It is used for setting [Alarm Address] data format, and set integer and scale digits;
2) Alarm Condition
Alarm is triggered when designated address meets the alarm condition, it provides four conditions;
High alarm: Alarm is triggered when it reaches high limit.
Low alarm: Alarm is triggered when it reaches low limit.
Range alarm: Alarm is triggered when it reaches the range.
Equivalent alarm: Alarm is triggered when the value equals to the present value.
3) Alarm Info: It is used for setting alarm content (command);
4) Alert: When the alarm occurs, the [Control Bit] will set ON;
5) Alarm Screen: Pop-up alarm screen (it need to be sub-screen);
Position: The location of the screen alarm display.
Pop-up Interval: The time of reopen the alarm screen when alarm screen closed.
Pop-up once: Pop up alarm screen once.
Close window when alarm off: Automatically close the alarm screen when alarm off.
6) Beep when alarm ON: beep works when the alarm is triggered, in the default mode, the beep works until the alarm is released.
Beep once: Beep works once, when alarm is triggered;
7) Operation buttons
These buttons can perform corresponding editing operations on the [Alarm List].
8) Alarm List
It displays all the word alarm lists; it will show the alarm information;
Operating procedures of adding one alarm
1) Click [Project]->[ Word Alarm] as below shows;
2) Click [Add] button to open [Word Alarm] setting window;
3) Set Basic information of word alarm;
4) Set [Content];
5) Other settings can be set according to the actual situation;
6) Click [OK] button to complete settings;
PI alarm demo download link
https://drive.google.com/open?id=1Llq03CMISM_1mMIfU308hxFbs4rGdQGP
