# 6.5.8 Camera Control

**Introduction**

This is for control camera; this object need to be used with camera display object.

**Description**

![](https://3950998874-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2Fpi-series-user-manual%2F-Luq9wKJQBne8wcN8ulg%2F-LuqA7SrHLzee6ThOtYv%2F13.png?generation=1575014403569106\&alt=media)

**1) Use dynamic control instruction**

Read a string from designated system address, and then combine the instruction to control the camera image.

When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.

**2) Camera control instruction**

This is for enter static instruction for camera, so that users can operation camera when HMI running;

**3) Control bit**

Trigger the switch to control the instruction.

**4) Enable beep**

The object will beep when operate.